96%
recommend
Student,
Kyna
In-Person Camp
3D Modelling & Printing
26 August, 2016
I did a daytime camp about 3D design and i absolutely loved it! It was the best! We got to create our models, 3D print them, play a game with them in it and even see them in a hologram! It was the best week ever and i totally recommend it
Student,
Luca, 13
In-Person Camp
3D Modelling & Printing
25 August, 2016
I learned how to use blender (and holograms/3d printers) to create models and armatures for body's (stickmen models) and then how to animate them.
.
.
.
Student,
Constance, 14
In-Person Camp
3D Modelling & Printing
25 August, 2016
I really enjoyed this week, my tutor was amazing and we had a group of seven 11-14 year olds. We used blender to create a character and animations using our character. We were showed a 3D printer and they are going to 3D print our models and post it to us after the course (the printing takes a long
Student,
Thomas, 12
In-Person Camp
3D Modelling & Printing
25 August, 2016
It was Nice and fun when we were modelling our own characters, but SOME of the teachers are Anti-Meme.
Student,
Jacob, 11
In-Person Camp
3D Modelling & Printing
25 August, 2016
This week was really fun. I learned how to use blender and animate with my model. I really liked watching the animations play and my favourite one was my backflip.
Student,
Rhiana, 13
In-Person Camp
3D Modelling & Printing
25 August, 2016
I took this coursed and we learned how to use blender to design our 3D models. The course was very rewarding when we put our beloved characters into a platform game and then printed them out in the 3D printer. I was happy to take mine home.
Student,
Daniel, 11
In-Person Camp
3D Modelling & Printing
25 August, 2016
This was a great course, but I found it quite difficult. It was great fun and I really enjoyed it.The software was tricky but I found this week very beneficial.
Student,
Eleanor, 14
In-Person Camp
3D Modelling & Printing
25 August, 2016
lots of fun and informative, blender is a great program and is relevant for future uses. range of ages and we work at a steady pace. it was a fun course
Student,
Ben, 13
Residential Camp
3D Modelling & Printing
19 August, 2016
one word
goirgioisbeutifal
Five stars
Student,
Julian, 11
Residential Camp
3D Modelling & Printing
19 August, 2016
It was great and I had a lot of fun and really wished that I could rate 10 stars. But be careful Nyan Cat is here!!!
Student,
Marina, 15
Residential Camp
3D Modelling & Printing
19 August, 2016
This was soooooooooooooo fun!!! I think that I am going to use Blender a lot more in the future! Shout out to Giorgio who was really kind and had the patience of a saint when we caused mayhem every 5 or 10 mins! ;D
Student,
Jude, 13
Residential Camp
3D Modelling & Printing
19 August, 2016
This was a fun experience that has taught me a lot about 3D animation, something i have never done before. I have been able to understand this complex modelling program called Blender thanks to the great teaching of Giorgio. I would definitely recommend it to anyone who has never tried it as it is
Student,
Fred, 12
In-Person Camp
3D Modelling & Printing
18 August, 2016
I did really do want to come again because it is expensive. The tutor was really good he is really good at teaching.
Student,
Deborah, 14
In-Person Camp
3D Modelling & Printing
18 August, 2016
It was a fun camp, although a little challenging to begin with, learnt a lot and helped me to understand some really quite complicated software, that would've taken me a lot more time if I hadn't gone on the course. Tutor were happy to help and really friendly.
Student,
Dan, 13
In-Person Camp
3D Modelling & Printing
18 August, 2016
it was quite complicated but the results were cool
Student,
Max, 14
In-Person Camp
3D Modelling & Printing
18 August, 2016
This was great camp and I learned a throughout. It was good fun making, rigging and eventually 3D printing them. Seeing our characters in a game itself was interesting too.
I would definitely recommend this camp to anyone looking for something to do in the summer.
Student,
Charu, 14
In-Person Camp
3D Modelling & Printing
18 August, 2016
I have learnt a lot in course. It was fun and interesting to make the characters and the teacher was really helpful. It does get challenging at times, however I was able to overcome them with the help. Also, the people there were really friendly. Over all, I have enjoyed this course.
Student,
Max, 15
In-Person Camp
3D Modelling & Printing
18 August, 2016
10/10 such wow much 3D
Student,
Max, 15
In-Person Camp
3D Modelling & Printing
18 August, 2016
10/10 such wow much 3D
Student,
Moo, 13
In-Person Camp
3D Modelling & Printing
18 August, 2016
Best
Student,
Ben, 11
In-Person Camp
3D Modelling & Printing
12 August, 2016
I found the 3D design course extremely fun and interesting, and it was a great way to get started with 3D design. I also found the presentation/video really helpful and I learnt loads from it, but the only reason i did well was because of our tutor Henry, who helped immensely, and it wasn't just me
Student,
Josie, 12
In-Person Camp
3D Modelling & Printing
12 August, 2016
Learnt so much never got bored.
Student,
Alex, 13
In-Person Camp
3D Modelling & Printing
5 August, 2016
I really enjoyed this funtech course as usual week. I learnt lots about 3D sculpting and would like to do this course again in future
Student,
Tanvi, 12
In-Person Camp
3D Modelling & Printing
5 August, 2016
This course was really fun. I had a great time and learned a lot about 3D animating and printing. My tutor was really patient and helpful. We also got to 3D print our own characters.
Student,
Ashley, 13
In-Person Camp
3D Modelling & Printing
5 August, 2016
It was a very fun and educational week. we learned how to animate and create a character. It was very fun.
Student,
Ella, 13
In-Person Camp
3D Modelling & Printing
5 August, 2016
i really enjoyed this summer camp it was great fun. It was a bit challenging with specific parts of it but it was still fun and enjoyable. everything is amazing and the tutors are all really nice and will help you if you are struggling. I really enjoyed this course and will recommended it to my fr
Student,
Tasha, 13
In-Person Camp
3D Modelling & Printing
5 August, 2016
I liked this course, it was a bit rushed at the end to get everything done but they use a program that is free so you can use it at home. The 3D printers were acting up a bit but the total course was really good and I'd recommend it.
Other,
Elena
In-Person Camp
3D Modelling & Printing
28 August, 2015
Everyone is very friendly here. The girl from reception is always smiling. It makes everybody feel very good. The boys that are helping to the kids are great! The girl I am looking after is very happy to be here and she enjoyed very much the time spent in this camp. Thank you very much :)
Student,
Tmc, 11
In-Person Camp
3D Modelling & Printing
20 August, 2015
I really loved the course and I definitely want to do want to do it again I would recommend it for everyone
Student,
Taran, 11
In-Person Camp
3D Modelling & Printing
20 August, 2015
AMAZING - no seriosly I loved it and we got to 3D print our models
Student,
Zoe, 13
In-Person Camp
3D Modelling & Printing
20 August, 2015
I had a really good time. We used a piece of software called "Blender" to create are final models and animate them; at the end we got to finish our final model on the 3D printer. It was really fun and I'd definitely do it again!
Student,
Sophie, 13
In-Person Camp
3D Modelling & Printing
20 August, 2015
I had an amazing time, and learnt many new and interesting things that I would not have learnt if I didn't go there, The activities we do are really fun. I hope in the future I can go on more courses. We used a programme called 'Blender' it was really interesting learning all the new techniques, and
Student,
Noah, 15
In-Person Camp
3D Modelling & Printing
20 August, 2015
This course is a brilliant and exciting experience. I have learned a lot this week and I would probably come again. The tutors are fun and very easy to talk to. Thank-you FunTech!
Student,
Alex, 11
In-Person Camp
3D Modelling & Printing
20 August, 2015
I have come 3 times. If that doesn't mean something about quality then i don't know what does.
Student,
Amy, 15
In-Person Camp
3D Modelling & Printing
20 August, 2015
We used Blender to create both simple and detailed models.
Student,
Julian, 0
In-Person Camp
3D Modelling & Printing
20 August, 2015
Step 1. Learn how to Blender
Step 2. Get totally original idea
Step 3. Attempt to model it
Step 4. ???
Step 5. Fun!
Student,
Zachary, 10
In-Person Camp
3D Modelling & Printing
20 August, 2015
Hard but it is also funny
Student,
Sai, 15
In-Person Camp
3D Modelling & Printing
20 August, 2015
8/8 lots of fun. Blender is really complicated but it's satisfying when you complete something difficult. Lunch Activities were really good too. The teachers were very interactive. Definitely will be experimenting with blender in my own time after this course aswell.
Parent,
Mrs
In-Person Camp
3D Modelling & Printing
14 August, 2015
My son was happy to participate on this course and had a 'fun' time doing his favourite activity - computing. He already knew some of the techniques but gathered a lot more knowledge along the way. I chose it for him because it seemed an educational, enjoyable and productive workshop which it proved
Student,
Ben, 15
In-Person Camp
3D Modelling & Printing
14 August, 2015
I really enjoyed this course. The only downside was that the software we used was complicated and sometimes didn't work. Other than that it was a great course.
Student,
Nico, 11
In-Person Camp
3D Modelling & Printing
14 August, 2015
Its really fun to make your own models then 3D print them. Its quite hard to start but once you get the hang of it, it gets easier.
Student,
Nicco, 11
In-Person Camp
3D Modelling & Printing
14 August, 2015
Fantastic, what else should I say about Funtech?
Student,
Angelica, 12
In-Person Camp
3D Modelling & Printing
14 August, 2015
This camp was fun. It was inspiring, fun and easy but challenging at times.
Student,
Anonymous, 13
In-Person Camp
3D Modelling & Printing
14 August, 2015
It was a really fun course where i learnt a lot of different skills to help me animate and model different characters
Student,
Paris, 11
In-Person Camp
3D Modelling & Printing
13 August, 2015
This Course Is Very Good And Useful For Life Ahead. You Learn How To Animate And Do Stuff Like Making A Character And Making Him Wave,Run,Jump And Flip.It Is Good For People Who Want To Learn How To Animate And It Is Good For People To Learn More.I Think It Is A Great Course For Children Of Any Abil
Student,
Samuel, 11
In-Person Camp
3D Modelling & Printing
13 August, 2015
The camp was fun and I learnt a lot. I would highly recommend it to anyone who wants to learn how to model and animate.
Student,
Martin, 11
In-Person Camp
3D Modelling & Printing
13 August, 2015
I found this course really fun and intereresting. Both my tutors Mazen and Nidhi (sorry I couldn't put you down). It was complicated, but still very fun.
Student,
Daniel, 11
In-Person Camp
3D Modelling & Printing
13 August, 2015
I loved this course so much it was grate to make my own character and then get to 3D print it.
Student,
Cameron, 12
In-Person Camp
3D Modelling & Printing
13 August, 2015
This was amazing. Thanks!
Student,
Olli, 14
In-Person Camp
3D Modelling & Printing
13 August, 2015
This was a great course to really add scope to my abilities and have fun, especially since we got to 3D print our models, and add them into a basic game.